Holding pressure test stand (HIP) introduces BYT-10A 

 One. The main performance test-bed 
 1 Test medium: water, the emulsion can also be used, water glycol, mineral oil. 
 2 Ambient temperature: room temperature. 
 3 medium temperature: room temperature. 
 4. Driving pressure :5-7kg 
 5 output pressure :1-500bar 
 6 with the pressure drop setting, time setting, printing detection capabilities. 
 II. Major structural component 
 1 high flow high pressure pump: the water tank of water or emulsion to give high-pressure pump, quick pre-rinse the specimen and do low static pressure test. 
 2 high-pressure air pump: the low-pressure pump provides the low voltage source into high voltage necessary for testing the source, the maximum pressure of 500bar (maximum flow 25 l / min). 
 3 Install a block: for mounting pressure hose assemblies have been tested. Can be customized according to user requirements of various connectors, connector in the form of fast-loading (random self-20 quick connector, than can be customized). 
 4 Control system: man-machine interface control, can be pre-set test pressure, rise time, dwell time, pressure relief rate, drying time, the line number (1-10 root), etc., the system will automatically command automatically adjusted to control the testing process, reliable performance, high precision. . 
 5 holding time and pressure values ??can be set at any time. 
 6 drop the device itself is not more than 3%. 
 III. The main test bed for performance testing of hose assemblies, including 
 1 leak test hose assembly packing 
 (2) pressure test hose assembly 
 Phone :025 -8,538,206,013,057,523,430 Zhu Xiaomei